AUTONET TV

Wishy-Washy in Winnetka

Perhaps you've found yourself driving when something all of a sudden splashes on your windshield, obstructing your view. You know that sinking feeling when you try to turn on the windshield washers and no fluid comes out. Now you're blinded even more. What can you do?

The best thing is to make sure your windshield washer fluid is always topped off and ready for these situations. You probably figure you'll grab a bottle of that blue stuff you see in the store. But is that really the right choice?

One thing you know isn't the right choice is plain water. It can freeze when temperatures drop. Plus, when it's close to the freezing mark outside, spraying water on your windshield can freeze, turning it literally into frosted glass and blinding you suddenly. Water freezing in your vehicle's washer lines can also damage them.

There are different types of windshield washer fluid made for different climates. Many have alcohol to prevent them from freezing; their label will usually tell you at what temperature they'll start to freeze.

Some washer fluids will have detergents in them so they can cut through contaminants and dirt. Still other washer fluids have a chemical in them to prevent streaking.

Also keep in mind some washer fluids are made to be put in your fluid reservoir as is; others are made to be diluted.

No matter what washer fluid you pick, make sure you have plenty of it in your vehicle. Our pros at A.G. Automotive & Diagnosis can top off your levels with the right kind of fluid. That's also a good reminder to have your windshield washer system working properly. Your technician can check not only the washers but the wiper blades and motor to make sure all are in top condition. The worst time you can discover it is usually when you need it most.

A.G. Automotive & Diagnosis
19735 Sherman Way Suite 2
Winnetka, CA 91306
(818) 438-9608
http://www.agautodiagnosis.com

TCB your PCV (PCV Valve Replacement)

Your gasoline engine goes through some exhausting work.  Yes, it's truly exhausting, as in: it produces exhaust! And when your engine starts behaving like it's exhausted, such as running poorly or getting lousy fuel economy, the trouble may be something called a PCV valve.

Did you know it's a series of explosions that creates the power in your engine? The spark plugs ignite a mixture of gasoline and air and BANG! A whole bunch of those and you're engine is humming away. Leftover vapors from those explosions go into your crankcase, which is also a place where engine oil goes.  Those vapors still have a lot of unburned fuel in them, and if they had nowhere to go, they'd turn your oil into a thick mess called sludge, not good for a smooth running engine. 

Engineers came up with an idea. Re-direct those gasses building up in the crankcase into the engine's air intake and mix them with fresh air.  That way the unburned fuel could go through the engine again and produce power. It also means the unburned fuel doesn't pollute the air.  The part that makes that happen is called the Positive Crankcase Ventilation (PCV) valve.

Besides reducing pollution and preventing the oil from turning to sludge, the PCV valve also relieves pressure in the crankcase, reducing the potential for oil to leak. One of the reasons you should get your oil changed as frequently as your vehicle's manufacturer recommends is that it helps reduce chances for problems with the PCV valve.

After a while, the PCV valve can itself get gummed up and stick, and the driver may notice oil leaks, reduced power or engine hesitation.  That's why it's important to make sure the PCV valve is operating like it should, and often it can be diagnosed during a visual inspection by our technicians.  Replacing a PCV valve is usually quick and inexpensive.  After it's done, your vehicle will run with the performance and fuel economy you're used to.  Goodbye exhaustion!

A.G. Automotive & Diagnosis
19735 Sherman Way Suite 2
Winnetka, CA 91306
(818) 438-9608
http://www.agautodiagnosis.com